How to use your Eunoia band

Swipe through the steps →

STEP 1 OF 7

One button. No app.

TAP · HOLD

TAP = change / nextHOLD 3s = confirm

That's the whole system. Every step below uses just these two moves.

STEP 2 OF 7

Charge it first

100%

USB plug built in~1 hour

Plug the band's USB end into any phone charger or laptop port before your first night.

STEP 3 OF 7

Set the time

06:30

TAP onceHOLD 3sTAP to change

Hold until the hour flashes. Tap to change it, hold to move on to minutes, date and 12/24h.

Then don't touch it for 8 seconds. It saves itself.

STEP 4 OF 7

Set your alarm

A1 OF

TAP ×2HOLD 3sTAP to setHOLD 3s to save

From the clock, tap twice to see A1 OF. Hold, set the hour, hold, set the minutes, hold to save.

It now wakes you at that time every day.

STEP 5 OF 7

When it vibrates

TAP ONCE

TAP once = stop

Press the button once and the vibration stops.

The alarm stays set, so it will wake you again tomorrow at the same time.

STEP 6 OF 7

Turn an alarm off

OF

TAP to the alarmHOLD 3sTAP to OFHOLD 3s

Same steps in reverse. Tap until it shows OF, then hold to save.

STEP 7 OF 7

Jumped back to the clock?

⏱ 5s

Pause = reset

If you stop pressing for about 5 seconds it returns to the clock. Nothing is broken, just start that step again.

Still stuck? Email hello@joineunoia.com.

Full instructions

Your band has one button and no app. Everything below takes about two minutes. Charge it fully before the first night.

The two moves you need

  • Tap (short press): changes the number that's flashing, or moves to the next screen.
  • Hold for 3 seconds: confirms and moves to the next setting.

If you stop pressing for about 5 seconds, the band goes back to the clock. That's normal. Just start the step again.

1. Set the time

  1. Tap once to wake the screen.
  2. Hold for 3 seconds. The hour starts flashing.
  3. Tap to change the hour, then hold 3 seconds to move to minutes.
  4. Do the same for minutes, month, day, year and 12/24-hour format.
  5. When you're done, don't touch it for about 8 seconds. It saves and goes back to the clock.

2. Set your alarm

  1. From the clock, tap twice. You'll see A1 OF (alarm 1, off).
  2. Hold for 3 seconds. The hour starts flashing.
  3. Tap to set the hour, hold 3 seconds, then tap to set the minutes.
  4. Hold 3 seconds to save. Alarm 1 is now on.

It vibrates at that time every day until you change it or turn it off. Need a second alarm? Tap three or four times from the clock to reach the other alarm slots and repeat the same steps.

3. Stop the alarm when it vibrates

Press the button once. The vibration stops and the alarm stays set for tomorrow.

4. Turn an alarm off

  1. Tap until the alarm you want is on screen.
  2. Hold 3 seconds, then tap until it shows OF.
  3. Hold 3 seconds to save.

5. Battery

The band has a built-in USB plug. Plug it into any USB charger or laptop port. A full charge takes about an hour. To check the battery, hold the button for 3 seconds on the clock screen and the percentage appears.

Something not working?

  • It jumped back to the clock: you paused too long. Start the step again and keep pressing within 5 seconds.
  • It didn't vibrate: check the alarm shows ON, not OF, and that the battery is charged.
  • Screen is blank: tap once. If nothing shows, charge it for an hour.

Still stuck? Email hello@joineunoia.com and we'll walk you through it. For returns, see our 30-night guarantee.